320D Pump Tester
Payment PayPal,Western Union,T/T
Place of Origin China
The 320D pump testercan test Caterpillar 320D common rail pumps, HEUI pumps and other common rail pumps.
Can save the test model, test conditions and standard testdata;
Can test common rail injectors and HEUI injectors;
Built-inflow meter (optional),
can test the pump flow.
1) Poweron into the selection page of the oil pump type, and select CAT320D pump or HEUIand common rail pump.
2) click the right upper corner icon toenter the language selection page, and provide Chinese, English and Russianthree choices.
3) CAT320D pump test page：Test conditions: cam speed, setting pressure, pulse width, angle,standard oil can be changed.；
Count is the test time, andit can also be set according to need.
Cam type: optional 4 cylinderor 6 cylinder.
4) Click model input bar, enter themodel selection page.：
On model selection page, youcan add and delete models,password,123
After adding the new pump model,click ok entering the test page, the test conditions and standard data can beedited again.
5) click the settings button on thetest page to enter the parameter settings page，
Flowmeter coefficient, railpressure sensor parameters, solenoid valve driving parameters and PID (pressurerising speed) can be set.
6) After the setting is completed,connect the plug and you can start testing.
a、 start the motor, adjust the speedand the set cam speed；
b、 After the speed is stable, click Startsand the test starts；
c、 Observe the pressure and flow ofeach working condition；
7) Common rail injector and HEUIinjector test:
a. Test conditions: pressure, injectionfrequency, pulse width,
standard fuel quantity can bechanged;
The firstline shows the actual pressure, flow rate and counting time;
The count isthe test time, and it can also be set as required;
The setparameters can be saved.
a. Injector test setting page:
This page can set the coefficient of the flow meter, thecoefficient of the rail pressure sensor, the driving parameters of the fuelinjector, the PID of the DRV,And the types of DRV and ZME
８) HEUI and commonrail pump test page
This page only provides an openloop test.
Startthe motor, click the start button, change the current of ZME and DRV, observethe pressure change；
If it is a normally closed pump, ZME currentadjusted to the minimum then sratr motor；
If it is a normally open pump, ZME currentadjusted to the maximum, then start motor；
This product is covered by a six-month warranty. In the event that you encounter any quality issues with the product during this warranty period, we offer a free replacement or refund, subject to the following conditions:
Return Procedure: To initiate a warranty claim, you must return the defective product to us. Please contact our customer support team for instructions on how to proceed with the return.
Inspection and Testing: Upon receiving the returned product, we will conduct a thorough inspection and testing to verify the reported quality issue.
Confirmation of Quality Issue: If our inspection and testing confirm the presence of a genuine quality problem, we will proceed with the warranty claim.
Resolution: Depending on the circumstances, we will either provide you with a replacement product or issue a refund for the purchase price of the defective item.
Please note that this warranty does not cover damage resulting from misuse, accident, alteration, or unauthorized repair. The warranty also does not cover normal wear and tear. Additionally, any products returned without prior authorization will not be eligible for warranty claims.
For any inquiries or to initiate a warranty claim, please contact our customer support team. We are committed to providing you with quality products and exceptional customer service.
WUXI WUNFA INT’L CO., LTD.